WTM Travel Motor
PHV Final Drive
MAG Travel Motor
JMV Track Drive
BMV Travel Motor
700CK Track Drive
700CT Track Motor
PMCI Travel Drive
Other Final Drives
PCR Swing Motor
MSG Swing Motor
M2X/M5X Swing Motor
WSM Swing Motor
Find by Brand
INSTRUCTION MANUAL for WTM Travel Motor (part 3)
by WEITAI on 21-08-25
Instruction Manual for a WEITAI made WTM Travel Motor (part 3) VI. Maintenance If the system pressure is abnormally increased during operation, stop and check the reason. Check whether the drain oil is normal. When the Travel Motor is working in normal loading, the leaking oil volume from the dr...
INSTRUCTION MANUAL for WTM Travel Motor (part 2)
by WEITAI on 21-08-17
Instruction Manual for a WEITAI made WTM Travel Motor (part 2) IV. Installation Lifting: the Travel Motor shall be lifted according to the requirements indicated on the package. After unpacking, the lifting of the Travel Motor shall be carried out with the corresponding ropes. Check the Travel M...
INSTRUCTION MANUAL for WTM Travel Motor (part 1)
by WEITAI on 21-08-12
Instruction Manual for a WEITAI made WTM Travel Motor (part 1) I. Overview WTM series Hydraulic Travel Motor (Final Drive, Track Motor) is a travelling device for Crawler Equipment. It is a swash plate hydraulic motor and planetary gearbox reducer assembly. It consists of a valve block wi...
Travel Motor maintenance: Gear Oil Change
by WEITAI on 21-03-01
Travel Motor maintenance: Gear Oil Change When you received a brand new Travel Motor, change the gearbox oil within 300 working hours or 3-6 months. During the following using, change the gearbox oil no more than 1000 working hours. If you are going to drain the oil, it is better to do s...
Final Drive maintenance: Gear Oil checking
by WEITAI on 21-02-22
Important Note: If you are receiving a Weitai Travel Motor which is delivered by air or Express Courier, there won’t be any oil inside the gearbox. You have to add new gear oil into the gearbox before starting using the new Travel Motor. For ocean or land delivery, there will be enough oil inside...
Why Travel Motor Is A Best Choice For Crawler Excavator?
by WEITAI on 20-09-08
The weight of medium and large crawler excavators is generally above 20t. The inertia of the machine is very large, which will bring a big impact to the hydraulic system during the start and stop of the machine. Therefore, the travel motors control system must be improved to adapt to this kind of...
Page 1 / 2
Hit enter to search or ESC to close